List of Accepted Extended Abstract

The following are the list of accepted extended abstract as on date 14th September 2017
The list of extended abstract will be updated regularly
Please refer your User ID and Paper ID for all communications
Sr. No. User ID Paper id Title of Extended Abstract
1 9 629 Numerical prediction of residual stresses and distortions in GMA welding of thin aluminium alloy plates
2 13 314 Innovative Techniques of Drag Reduction over Blunt Bodies at varied Angles of Attack in Supersonic Flow
3 28 358 Static analysis of composite boring bar using FEA
4 29 438 Micro-Mechanical Analysis of Piezo-Fiber Composites through Functional Analysis
5 32 435 Nonlinearity identification of a breathing cracked cantilever beam using Proper orthogonal Decomposition based Reduced Order Modeling
6 33 396 Multi-scale simulation of elastic waves containing higher harmonics
7 34 315 "Stochastic frequency response function analysis of functionally graded plates "
8 35 564 Effect of Length of Vortex Generators on the Overall Performance of a Transonic Axial Compressor Stage
9 36 316 Nonlinear active vibration absorber by time delay acceleration feedback
10 38 319 Active damping of structural vibration using porous ferroelectric ceramic
11 42 548 Bending and Free Vibration Analysis of Carbon Nanotube Reinforced Composite Spur Gear (CNTRCG) Using Finite Element Method
12 42 547 Damage Analysis of Fiber Reinforced Composite Plates
13 42 318 Bending and Free Vibration Analysis of Carbon Nanotube Reinforced Composite Spur Gear (CNTRCG) Using Finite Element Method
14 44 354 Diffusion induced stress in a cylindrical particle-binder system
15 46 382 Computational Investigation of Reynolds Number Effects on the Calibration of a Hemi-Sphere Four Hole Probe
16 52 499 On the Use of a Seven Hole Probe as a Six Hole Probe
17 52 498 Comparison of Single Hole, Two Hole and Four Hole Probes for Three-Dimensional Flow Measurements
18 52 360 Survey of Available Techniques for High Speed Turbomachinery Testing
19 53 431 An experiemental analysis of premixed coaxial isothermal and reacting swirling jet using 2D-PIV method
20 54 580 Stagnation and Static Property Correlations for Equilibrium Flows
21 55 571 Effect of skewness on stochastic natural frequency of sandwich plates
22 58 359 CFD Simulation of Hypersonic Shock Tunnel Nozzle
23 59 366 A DNS Study of Bulk Flow Characteristics of a Transient Diabatic Plume that Simulates Cloud Flow
24 60 581 Laser spallation: A novel technique to evaluate thin layer interface strength
25 61 421 Supersonic underexpanded jet impingement over axisymmetric jet deflector
26 65 330 Investigation of heat transfer from satellite cluster of cylinders at Subcritical Reynolds number
27 68 332 Effect of stepped bottom on the efficiency of the Oscillating Water Column using CFD
28 69 340 Comparison of standard and staggered conic fins of heatsinks for forced convection microelectronics application
29 71 350 Miscible fluids interaction in microchannels in presence of the obstacles
30 72 334 Simplified Theory for Long Underground Cylindrical Storage Tank
31 74 389 Ignition of Hot Particles with Vaying Diameter and Temperature
32 75 335 Transverse-only vibrations of a rigid square cylinder
33 78 373 A Micromechanical study of Fibre-Reinforced Composites with uncertainty quantification and statically equivalent random fibre distribution
34 77 429 Steady flow past two square cylinders in tandem
35 79 356 Supersonic Nozzle Design using method of characteristics
36 80 336 A modified higher order zigzag theory for stress analysis of composite laminates
37 81 337 Comparative study of Biocomposite and synthetic FRP composite with experimental verification
38 85 405 NURBS-enriched contact isogeometric element for adhesive contact problems
39 87 73 An Experimental Validation of Numerical Post-Stall Aerodynamic Characteristics of a Wing
40 88 646 Energy harvesting from vibration using IPMC taper cantilever beam
41 95 342 Rapid Large Amplitude Maneuvers for an Asymmetric Combat Aircraft: A Single Loop Nonlinear Control Scheme
42 96 400 Numerical implementation of phase transition based constitutive model for 2D and 3D SMP structural elements
43 97 344 Wind pressure distribution on rectangular plan tall building due to variation in height of interfering buildings
44 101 346 "AERODYNAMIC DESIGN EXPLORATION OF COMPRESSOR CASCADE FOR BETTER DESIGN "
45 102 495 Free vibration analysis of fiber metal laminated plates
46 106 397 Instabilities in granular medium due to explosions
47 108 348 Tapered Viscoelastic Rayleigh/ Euler- Bernoulli beam finite element for rotor dynamic analysis
48 109 349 On the order of accuracy analysis of SDWLS method
49 111 352 "Dynamic analysis of laminated composite plates using Finite Element Method "
50 113 361 STABILITY ANAYSIS OF CORRUGATED STRUCTURES FOR MORPHING WING AIRCRAFT
51 114 377 Effect of proof masses on composites piezoelectric energy harvester with variable mounting positions
52 116 357 Numerical Analysis of Rayleigh Step Bearing under Thin Film Lubrication using PMD as an improved method for Direct Iterative Approach
53 117 520 Non-polynomial zigzag theory for the static and buckling analysis of laminated composite and sandwich plates
54 118 378 HDMR Based Finite Element Model Update in Structural Damage Identification
55 119 469 Finite-element multi-point impact performance functionally graded turbo-machinery blades
56 123 386 Experimental Investigation of Evolution of Instabilities in Pipe Flow
57 125 364 Effects of Injector Nozzle Geometry on Engine Parameters for a Diesel Engine Fueled with Preheated Pure Biodiesel
58 126 369 Dynamics of axially functionally graded nonuniform beam with geometric nonlinearity
59 127 365 A Comparative Evaluation of Three Actuation Methods for Telescopic Span Extension of HALE UAVs
60 128 381 Shock train dominated confined supersonic cavity flow
61 129 368 AshockstableandcontactpreservingconvectivepressuresplitRiemann solverforcomputationofcompressiblehighspeedflows
62 131 436 Effect of air-fuel ratio on the performance and emission characteristic of a biogas fuelled spark ignition engine
63 132 477 Numerical Analysis of Internal Flow Field of a Mixed Flow Compressor Impeller
64 133 384 Enhanced exploitation of long endurance UAV’s electro-optical payload for improved surveillance
65 134 370 Spectral finite element for dynamic analysis of piezoelectric laminated composite beams
66 141 374 Obtaining exact modal parameters by removing effects of probe and exciter using experimental modal analysis
67 142 440 Comparative study of mode I fracture property of conventional concrete and cementitious composite material
68 143 375 Large-eddy Simulation of Shock Train in Supersonic Diffuser Flows
69 147 399 Effect of void shape and orientaton, and material anisotropy on the fracture of AA7075
70 154 390 Coordinated Path Planning and Simultaneous Rendezvous of UAVs
71 155 391 Modeling of Fuel Reactor in a Chemical Looping combustion Process by using CFD
72 156 392 MMOC: A novel idea for fully expanded flow in supersonic nozzles
73 158 393 IR signature studies of serpentine nozzle with and without aft-deck
74 159 455 Aeroelastic studies of a double wedge airfoil in hypersonic flow regime
75 160 394 Effect of Graphite particulates reinforcement on the mechanical behaviour of glass fiber epoxy composites
76 165 404 Computational Investigation of Drag Reduction by means of Two-Dimensional Roughness on the Suction Surface: Effect of Position
77 166 407 Analysis of transformed sixth order polynomial curve for the contraction of Wind tunnel by using OpenFOAM
78 168 648 168_ext_0_Kesava Rao_Balu_ICTACEM-2017_Abstract_co...
79 169 412 Numerical Simulation of Supersonic flow seperation in Over Expanded Planar de-Laval Nozzle
80 173 418 A Semi-Analytical Adaptive Sparse Surrogate based Approximation Model: Application in Non-Linear Stochastic Dynamics and Vibration Control
81 178 423 Active structural vibration control under seismic excitations
82 179 425 A GPU-based simulation of nonlinear finite element problems
83 180 428 Micro Particle Image Velocimetry Studies on Flow of Suspensions through Bifurcating Channels
84 182 250 A numerical study on the behaviour of steel beam-concrete slab composite structure
85 183 603 Different Gaseous Fuels under Variable Compression Ratio and Spark Location in Spark Ignition Engine: The Comparative Performance Study
86 184 433 Electrodeposited Functional Polymer Nano-composites (EFPNC) – Futuristic Materials for Aerospace and Electronic Applications
87 185 437 Gravity Wave Interaction with Multiple Submerged Porous Structures on Impermeable Multi-step Bottom
88 191 444 Fatgue Life Assessment of an Existing Railway Bridge in India Incorporating Uncertainty
89 194 4 Numerical simulation of flow over a re-entry crew module
90 205 61 TURBULENT FLOW OVER A TRAIN OF K-TYPE ROUGHNESS
91 206 205 Numerical Study of the Blade Sweep and Lean Effects on an Axial Supersonic Impulse Turbine Flow Field and Performances
92 211 226 Modeling of Large Elasto-Plastic Deformations in Bi-material Components by FEM
93 212 647 Hand Held FFT ANALYSER FOR MODEL ANALYSIS
94 216 247 Design and feasibility analysis of hot air tethered aerostat system
95 219 91 Actuator Modeling for Electro-magneto-hydrodynamic Flow Control Studies
96 220 10 Numerical simulation of flow over a re-entry crew module
97 226 535 Differential Evolution for Regular Orbit Determination
98 228 37 Optimal Design Technique and Economical Assessment of Stand-Alone Small-Scale HAWT for Indian Scenario
99 233 52 Wind Fragility Assessment of RC Chimney considering Temperature Effects
100 234 55 Active Aeroelastic Wing Technology – A Preliminary Study
101 235 223 Study on real-time engine model for performance verification of turbofan engine EECU in the normal operation phase
102 243 106 Development of Coupled Dual grid Level Set and Lattice Boltzmann based Multi-Phase Flow Solver
103 244 94 Numerical Simulation of Magnetic Pulse Welding Process for Aluminum Tubes to Steel Bars
104 245 109 "SURVEY OF NOVEL FILM COOLANT INJECTOR CONFIGURATIONS OF GAS TURBINE BLADES "
105 246 214 POD Analysis of Flow Past Two Circular Cylinders in Tandem Arrangement
106 247 112 Applicability of Tricycle Modeling Method in the Simulation of Aircraft Steering Systems
107 248 115 Characterisation of flow structures for a surface interacting plane turbulent jet
108 249 124 Analysis of Adhesive Layer Strain Field in a Single Tapered Scarf Repaired CFRP laminate using Digital Image Correlation
109 252 133 Quasi Steady Stall Modelling of Aircraft using Least-Square Approach
110 258 256 Numerical study on the hydrodynamic performance of S1210 hydrofoil used in current turbines due to the presence of Tube slot
111 260 181 Nonlinear Analysis of Skew Plates on Winkler Foundation using Element Free Galerkin Method
112 261 190 Effect of delamination on vibration characteristic of laminated composite plate
113 263 295 Identification of Nonlinear Dynamical Systems using HDMRKalman Filter
114 264 540 Study of the Effect of Heat Source Position on Thermo-Acoustic Instability boundaries of Rijke tube
115 265 304 Computational Investigation of Drag Reduction by means of Two-Dimensional Roughness on the Suction Surface: Effect of Position
116 266 199 Characterization, Micromechanical Analysis and Prediction of Effective Properties of Prepreg Based Discontinuous Composite
117 270 241 PREDICTION OF ECCENTRIC JET NOISE DIRECTIVITY USING LINEAR STABILITY ANALYSIS
118 271 253 Wave propagation in a delaminated thin pre-twisted anisotropic strip
119 274 271 The Effects of Micromechanical Parameters on the Bending Behaviour of Glass-epoxy Laminated Composite Shells
120 276 292 Effect of Geometric Imperfection on the vibration response of shear deformable functionally gradient plates
121 277 298 Mixing Characteristics of Nozzles Integrated with Ultra- High Frequency Actuators
122 281 448 STUDY OF FLOW CONTROL DEVICE FOR SHIP AIRWAKES
123 282 515 Dynamic responses of Bridge and Vehicle for various Vehicle models
124 283 450 Turbulent characteristics of oscillatory flow over rough bottom
125 285 454 A computational model for VIV induced fatigue damage assessment of marine riser in current dominated locations
126 286 457 Wave propagation in a 2D nonlinear acoustic waveguide with a membrane
127 287 463 Vibration analysis using machine vision system
128 288 460 Sound radiation from a fluid-loaded perforated panel set in a baffle
129 290 490 Direct transfer-trajectory design to Jupiter using Iterative Pseudostate Technique
130 291 489 State estimation using filtering methods applied for Aircraft landing maneuver
131 292 470 Crashworthiness performance of Frusta Tube Structures against Eccentric loading
132 293 462 On Fatigue Crack Growth in Plastically Compressible Hardening Solids by Crack Tip Blunting
133 296 476 DESIGN, FABRICATION, TESTING AND COST OPTIMIZATION OF MONOPROPELLANT THRUSTER
134 299 475 Effect of hydrogen functionalisation on 2D nanomaterials
135 301 486 Computational analysis of Heat Transfer enhancement in Fin and Tube Heat Exchanger using Rectangular Vortex Generators
136 302 555 Static and Dynamic Characterization of Glass Fiber Reinforced Polypropylene Composite and its Application for Horseshoe
137 302 518 Static and Dynamic Characterization of Glass Fiber Reinforced Polypropylene Composite and its Application for Horseshoe
138 303 492 Aerodynamic Parameter Estimation using LASSO Regression Method from Flight Data
139 305 497 Research Review on Variation in VARTM Experimental Setup Development
140 310 509 Numerical investigation of crushing behavior of conventional and reinforced honeycomb structure against in plane loading
141 311 500 DevelopmentofM–DSMCforHypersonicflows
142 312 511 Effect of module on wear resistance of high contact ratio spur gears through optimized fillet stress
143 315 516 Computational Fluid Dynamic (CFD) analysis of using a SiC based nanofluid as an automotive radiator coolant
144 321 536 Methodology for analysing two dimensionally periodic phononic crystals for elastic wave attenuation and guiding
145 345 530 Computational Study of Air Flow Interactions and Drag Reduction Techniques in Vehicle Platoons
146 347 538 Estimation of multidimensional demand curves using extreme value analysis
147 349 533 A note on dynamic initialization of numerical model for plankton dynamics in Sundarbans Estuarine Systems, India
148 360 537 Combustion Characteristics of Boron-HTPB Based Solid Fuels for Hybrid Rocket Applications
149 361 553 Two-dimensional analysis on Rayleigh Benard convection in a square cavity with adiabatic and isothermal sidewall conditions
150 362 546 Obstacle Avoidance for Unmanned Air Vehicles Using Monocular SLAM with Chain Based Path Planning
151 364 549 Vibration Analysis of Piezoelectric Laminated Composite Plate Using Inverse Hyperbolic Shear Deformation Theory
152 365 551 Combustion Characteristics of Boron-HTPB Based Solid Fuels for Hybrid Rocket Applications
153 366 550 Study on freeze drying of water and milk in a spherical shell
154 368 560 Effect of amplitude and oscillation frequency on pitching airfoil propusion and flow periodicity
155 369 554 Numerical and Experimental study of sublimation dehydration of water
156 371 557 CFD analysis of centrifugal pump performance with different impeller geometries
157 396 563 Effect of Body Flap on the Aerodynamics of RLV-TD at Subsonic Mach Number
158 404 569 Lattice Boltzmann computation of natural convection in a square porous cavity with non-uniform wall temperatures
159 409 575 Entropy generation analysis of an energy generating plate dissipating heat into its surrounding fluid medium
160 412 582 Force estimation on a clamped plate using a deterministicstochastics approach
161 417 583 NUMERICAL INVESTIGATION OF THE EVACUATION EFFECT IN THE EXPANSION DEFLECTION NOZZLE
162 419 590 Failure Analysis of Circular Composite Patch Adhesively Bonded on Damaged Carbon Fiber Reinforced Polymer Panel
163 423 604 Underwater Time Delay Estimation with Maximum Length Sequence Signals and Rayleigh underwater modeling
164 426 605 Fluid-structure interaction dynamics of a flexible foil in low Reynolds number flows
165 431 610 Generation of wing-tip vortices by flapping rigid plate, optimization of PIV measurements and identification of vortices using various algorithms
166 432 615 Damage Detection of Laminated Composite Shells using Unified Particle Swarm Optimization
167 434 614 A new hybrid unified particle swarm optimization technique for damage assessment from changes of vibration responses
168 436 616 Influnce of thin rotating axial rod and axial magnatic field on lid driven swirling flow: a comparitive study